Clereco
Cross-Layer Early Reliability Evaluation for the Computing cOntinuum
Cross-Layer Early Reliability Evaluation for the Computing cOntinuum
Partner Polito presents the paper SIFI a reliability evaluation framework for soft-errors built on top of Multi2Sim at 23rd IEEE International Symposium on On-Line Testing and Robust System Design (IOLTS’17)
Partner UoA presents the paper RT Level vs. Microarchitecture Level Reliability Assessment: Case Study on ARM Cortex-A9 CPU at the 47th IEEE/IFIP International Conference on Dependable Systems and Networks (DSN 2017)
Partner UoA presents the paper MeRLiN: Exploiting Dynamic Instruction Behavior for Fast and Accurate Microarchitecture Level Reliability Assessment at the the 44th Annual International Symposium on Computer Architecture (ISCA '17)
Partner Polito presents the poster Microarchitecture Level Reliability Comparison of Modern GPU Designs: First Findings at the 2017 IEEE International Symposium on Performance Analysis of Systems and Software (ISPASS'17)
Partner UoA presents the paper Performance-Aware Reliability Assessment of Heterogeneous Chips at 35th IEEE VLSI Test Symposium 2017 (VTS17)
Torino, December, 2016. The research program of the joint FP7 Collaboration Project CLERECO (Grant No. 611404) aiming to investigate new design methods for early reliability evaluation of digital systems in the forthcoming computing continuum is now successfully concluded.
Partners POLITO, UPC, UoA and CRNS are going to present innovative results and tools of the CLERECO project at the XXXI edition of the Design of Circuits and Integrated Systems Conference, DCIS 2016, held in Granada, Spain from 23rd to 25th November 2016.
Partner POLITO presents the paper Cross-Layer System Reliability Assessment Against Hardware Faults at International Test Conference, ITC 2016 in Fort Worth Texas, TX.
Partner POLITO presented the project at the special session organized during the PATMOS 2016 26th International Workshop on Power and Timing Modeling, Optimization and Simulation 2016, Bremen, Germani 21-23 September 2016.
Partner POLITO presented the project at the EU Project Day organized during the HiPEAC Conference 2016, Prague, 18-20 January 2016.
Partner UOA will present two papers at 2016 IEEE International Symposium on Performance Analysis of Systems and Software April 17-19, 2016, Uppsala, Sweden on “Anatomy of Microarchitecture-Level Reliability Assessment: Throughput and Accuracy” and “GUFI: a Framework for GPUs Reliability Assessment”.
Partner UoA will present a paper at IEEE Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS) 2015 on “Accelerated Microarchitectural Fault Injection-Based Reliability Assessment”.
Partner UoA will present a paper at IEEE International Symposium on Workload Characterization (IISWC) 2015 on "Differential Fault Injection on Microarchitectural Simulators".
Partner POLITO will present a paper at the 2nd Workshop On Approximate Computing (WAPCO 2016) held in conjunction with HiPEAC 2016, Prague, 18-20 January 2016, on “Early Component-Based System Reliability Analysis for Approximate Computing Systems”.
Partner POLITO presents a paper at IOLTS 2015 on Bayesian Network Early Reliability Evaluation Analysis for both permanent and transient faults.
CLERECO in collaboration with EU projects BASTION and ELESIS organizes the 1st International Workshop on Reliability and Aging in Forthcoming Electronic Systems on May 28-29, 2015 in Cluj-Napoca Romania.
Some pictures collected during CLERECO presentations ETS 2015 in Cluj-Napoca, RO.
On May 25th, Alessantro Vallero from POLITO presents a poster on A Bayesian model for system level reliability estimation @ IEEE European Test Symposium 2015 in Cluj-Napoca at the IEEE European Test Symposium 2015 in Cluj-Napoca 2015.
Prof. S. Di Carlo (POLITO) and Prof. D. Gizopoulos (UoA) illustrate CLERECO's objectives during the HiPEAC Computing System Week in a special session organized withFP7 projects HARPA, CLERECO and EXCESS.
Partner UPC discusses some technology-related CLERECO's objectives and challanges during an invited talk entitled "Cross-layer studies: from technology to circuits and architectures" at the Xi Computer Architecture Research Group, University of Cyprus, in Cyprus, April 2015.
Partner POLITO presents a paper at DTIS 2015 on STT-MRAM Cell Reliability Evaluation under Process, Voltage and Temperature (PVT) Variations
Maha Kooli from CNRS talks about "Hardware Independent Evaluation of Computer based System Reliability" at SETS 2015.
Some pictures collected at the CLERECO stand during DATE 2105 in Grenoble, France.
From March 9th, till March 12th, 2015, CLERECO presents its main idea with a stand at the Design, Automation & Test in Europe Conference 2015 in Grenoble (France).
On March 19th-20th 2015, CLERECO Partners meet in Athens (Greece) for the periodic Technical Meeting.
Partner POLITO presents a paper at HiPEAC 2015 on FLARES: an aging aware algorithm to autonomously adapt the error correction capability in NAND Flash memories
Partner POLITO presents a paper at IDT 2014 on Integration of STT-MRAM model into CACTI simulator
On November 27th-28th 2014, CLERECO Partners meet in Turin (Italy) for the periodic Technical Meeting.
Some pictures collected during CLERECO papers presentations at DFTS 2014 in Amsterdam, NL.
Partner UoA discusses CLERECO's objectives and challanges during an invited talk entitled “Towards Early and Accurate Reliability Evaluation” at the HiPEAC Computing Systems Week (CSW) 2014 held in Athens.
Partner UPC discusses CLERECO's objectives and challanges during an invited talk entitled “The uncertainty of technology and its consequences” at the HiPEAC Computing Systems Week (CSW) 2014 held in Athens.
Partner POLITO presents two interesting papers about:
- Reliability Estimation at Block-Level Granularity of Spin-Transfer-Torque MRAMs, and
- A Fault Injection Methodology and Infrastructure for Fast Single Event Upsets Emulation on Xilinx SRAM-based FPGAs
at the IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS) 2014 held in Amsterdam (https://www.dfts.org).
Partner POLITO paper on Reliability Estimation at Block-Level Granularity of Spin-Transfer-Torque MRAMs has been accepted for publication at the IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS) 2014 held in Amsterdam (https://www.dfts.org).
Partner POLITO published a new paper in the ACM TRANSACTIONS ON ARCHITECTURE AND CODE OPTIMIZATION on Flash memory reliability.
Partner UoA presents a CLERECO survey paper at DSD 2014 in a Special Session on European Projects in Digital Systems Design
Some pictures collected at the CLERECO Special session on Early Reliability Evaluation for the Computing Continuum during IOLTS 2104 in Plaja D'Aro, Spain.
Partner UoA presents a paper at IOLTS 2014 on Versatile Architecture-Level Fault Injection Framework for Reliability Evaluation: A First Report
Dimitris Gizopoulos (UoA), Stefano Di Carlo (POLITO) and Giorgio Di Natale (CNRS) moderate a special session on Early Reliability Evaluation in the Computing Continuum during the IEEE International On-Line Test Symposium.
Dr. Giorgio Di Natale (CNRS) illustrates CLERECO's objectives during the HiPEAC Computing System Week, Mixed Criticality/Reliability Workshop, in a Special session on Real-Time and Reliability Cross Domain Challenges.
Partner CNRS presents a paper at DTIS 2014 on A survey on simulation-based fault injection tools for complex systems
Partner CNRS presents a paper at ReCoSoc 2014 on Fault injection tools based on Virtual Machines
Partner UoA presents a paper at SELSE 2014 (https://softerrors.info/selse/) on Performance Assessment of Data Prefetchers in High Error Rate Technologies
Some pictures collected at the CLERECO stand during DATE 2104 un Dresden, Germany.
CLERECO project coordinator, Dr. Stefano Di Carlo talks about GPU reliability in a panel during the International Workshop on Dependable GPU Computing colocated with DATE 2014.
Partner POLITO is presenting a paper at DATE 2014 held in Dresden on
SSDEXPLORER: A VIRTUAL PLATFORM FOR FINE-GRAINED DESIGN SPACE EXPLORATION OF SOLID STATE DRIVES (Paper/SoftConf ID: 648)
From March 24th, till March 28th, 2014, CLERECO presents its main idea with a stand at the Design, Automation & Test in Europe Conference 2014 in Dresden (Germany).
Maha Kooli from CNRS talks about "A survey on Simulation-Based Fault Injection Tools for Complex Systems" at SETS 2014.
CLERECO presentation is hosted in the HiPEAC newsletter, in the "In the Spotlight" session, in the January 2014 issue, Info 37 (https://www.hipeac.net/content/hipeacinfo-37-january-2013).
The beginning of CLERECO research activities announced on Utilizer (view).
